72.5mm Celotex PL4060 is a 2-in-1 insulated plasterboard that reduces heat loss and also drylines the wall or ceiling - the best of both.
 
Key Features
Use in internal walls and pitched roofs
Combines insulation & drylining
0.022 W/mK thermal conductivity
Quick and easy installation
Zero Ozone Depletion Potential (ODP)
BBA certified
 
 
Technical Specification
Material Type:
PIR
Thickness:
72.5mm
Width:
1200mm
Length:
2400mm
Sales Unit:
Sheet
Sales Unit Coverage:
2.88m2
Brand:
Celotex
Manufacturer's Reference:
PL4060
Weight:
11.31kg/m2
Thermal Conductivity:
0.022W/mK
 
 
Insulating is a piece of cake when you're using 72.5mm Celotex PL4060 Insulated Plasterboard. This 2-in-1 insulation and drylining board meshes the low-heat transfer properties of PIR with the structural integrity of plasterboard. 

Comprising a high-performance PIR insulation board bonded to tapered edge plasterboard, the boards feature a narrow edge profile, making them better suited for either jointing or skimming. 

72.5mm Celotex PL4060 insulation can be installed in a range of building applications, from the internal side of solid masonry walls to under and between rafters and joists.
 
The 72.5mm refers to the overall thickness (both the insulation board (25mm) and plasterboard (12.5mm) elements bonded together). The 72.5mm Celotex PL4060 is BBA certified as a thermal laminate, and can be used in both existing domestic and non-domestic buildings. As well as providing thermal efficiency, it can also help to limit the risk of surface condensation.
 
72.5mm Celotex PL4060 Applications
In short, Celotex PL4000 is a high-performance plasterboard thermal laminate insulation suitable for dry-lining applications. PL4060 is purposed for use in pitched roof and wall applications in both new build and refurbishment projects. The 2-in-1 nature of PL4060 drastically reduces installation time, providing insulation and plasterboard in one operation.

You can either use mechanically fixed installation techniques or the direct bonding dot and dab method, which involves direct bonding to the masonry wall.

PL4060 can easily be used to help upgrade to current building regulation standards in:
Pitched roofs
Flat roof and wall applications
Internal solid wall insulation
The 'underneath' layer of insulation in between and under rafter and joist applications
Timber frame lining applications
 
72.5mm Celotex Insulated Plasterboard Specifications
With an impressively low thermal conductivity value of just 0.022 W/mK, PIR boards are easily one of the best insulators on the market. As well as providing thermal insulation, the rigid polyisocyanurate insulation and plasterboard elements of PL4060 represent an easy-to-install solution that is in line with current building regulation standards.

Let's check the specs:
Has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)
Thermal conductivity: 0.022 W/mK
Suitable for both direct bonding (‘dot and dab’) and mechanically fixed installation techniques
Can be used in pitched roof, flat roof and wall applications
Features an inbuilt vapour control layer
Offers the installer maximum flexibility and installation speed due to the tapered edge
Combines insulation & drylining
BBA certified
Compressive Strength: 120kPa
Reaction to Fire: Euroclass B-s1, d0 Reaction to Fire classification, according to EN 13501-1
 
72.5mm Celotex PL4060 Certifications
Achieves a BRE Green Guide Rating of A+
BBA approved – certificate 16/5357 (Plasterboard Thermal Laminate)
BBA and Ofgem approved
Plasterboard is defined as Class O in accordance with the Building Regulations
CE marked
 
72.5mm Celotex PL4060 Storage
The boards are supplied in polythene-wrapped packs and must be protected from prolonged exposure to sunlight and moisture. We recommend storing the boards inside, undercover and protected with opaque polythene sheeting. On top of that, the boards should be stacked flat and raised above ground level, in order to keep them nice and dry.